All Posts
Inspecting the Microspeed Coupling & Roller Star on a Demag DMR or DH Wire Rope Hoist Equipped with a Microspeed Gearbox
February 23, 2021Regular inspection of wear parts on the crane is imperative for safe operation and long life. When you are working on a Demag DH or DMR wire rope hoist equipped with a microspeeed gearbox arrangement, it is important to inspect the micropseed coupling and its roller star. These components should be inspected every time you do a brake adjustment and during periodic inspection of the crane. In this post, we will take your through why inspection of these components is so important and talk about the elements that could cause additional wear.
Read MoreCapabilities of the Demag DCBS Electric Balancer
January 26, 2021The newest member of the DC chain hoist family is the Demag DCBS Electric Balancer. See how it to gives your assembly line intuitive control.
Read MoreThe Crane Technician’s Guide to Replacing the OWL Overload Limiting Device on Gen 2 Demag DMR Rope Hoists
January 12, 2021Changes are constant in today’s world. Just like the world, our products have minor changes to them as time passes. On Gen 2 DMR units, there is a new overload limiting device called an OWL. This unit replaces the TCQ overload unit in previous generation Demag wire rope hoists. If you run into the need to replace the OWL unit, there are some tips your qualified technician should know as he starts the job.
Read MoreLifting in Extreme Environments – Precast Cranes and Hoists in Precast Plants and Yards
December 22, 2020Lifting equipment used in precast plants need to be severe duty. These businesses rely on the crane to keep production flowing so a reliable solution is absolutely necessary. Whether moving massive finished product or transporting concrete buckets, the equipment needs to be built to withstand the dusty, wet environment and heavy loads.
Read MoreGalvanizing Cranes and Hoists for Harsh Environments
December 8, 2020When you need to buy new or replace lifting equipment in your galvanizing operations, it’s important to understand your processes and to understand the equipment that can withstand the environment. The galvanizing process can be one of the harshest environments for the lifting components doing the work. In this post, we will talk about hot-dip galvanizing process, what additional protections your lifting equipment could have, and why it is important to work with an experienced crane manufacturer or dealer when equipping your galvanizing line.
Read MoreOverhead Travelling Cranes Used Outdoors- Design Considerations for Your Project
November 24, 2020When designing a crane for outdoor use, you must take extreme weather and location into consideration. Extreme weather can be sunlight, heat, cold, precipitation, wind, lightning and many other things. There are many details to consider when you will be using an overhead crane outside in any conditions. In this post, we are going to highlight some design considerations for your next overhead crane project that is used outdoors.
Read MoreLight Crane System Buyer’s Guide – Steel and Aluminum Enclosed Rail Track
November 10, 2020When you need an enclosed rail crane system, understand how steel and aluminum rail can meet your requirements. Read more.
Read MoreCrane Pendant Symbols: Pendant Labels, Motion Direction and the Importance of Operator Training
October 27, 2020Pendants are the operator’s connection to the crane. They provide the controls to make the crane do the job. Depending on what pendant you are using and your crane and hoist set up, Demag pendants can look very different. Regardless of how they look, the symbols on the buttons are standardized. Today we are talking about Demag pendant labels, motion direction, and why it is imperative to properly train all crane operators.
Read MoreEliminating Error 950 When Upgrading from the Demag DRC10 Radio System to the DRC10D3 System
October 13, 2020When you upgrade a Demag DRC10 radio system with the DRC10D3 system, you’ll find that you get a 950 error code on the screen. In this post, we will go through the basics of the DRC remote and what causes this error and how you can fix it.
Read MoreCranes Used in the Automotive Industry
September 29, 2020When it comes to supporting the automotive market with lifting and materials flow products, the possibilities are wide. Whether the support is needed for lifting many tons or moving a light load, the cranes and tools available are matched to the job. In this post, we will go through many of the common cranes and workstations that support the automotive industry. These cranes and workstations are specifically designed to meet the needs and demands of the workforce and production capabilities.
Read More