Skip to content
  • Cranes
    • Ergonomic Lifting & Material Handling
    • Automation for Overhead Cranes and Monorails
    • Preparing for Your Enclosed Rail Crane or Monorail Quote
  • Drives
  • Hoists
    • Wire Rope Hoists
      • Chain Hoist vs. Wire Rope Hoist
      • The Iconic Demag DH Wire Rope Hoist
      • Demag DVR Rope Hoist
    • Chain Hoists
      • The Demag Manulift Chain Hoist
      • Synchronized Lifting Solutions
    • Balancers
      • Balancer or Chain Hoist?
      • 5 Balancer Safety Features
      • Capabilities of the Demag DCBS Electric Balancer
  • News
  • Technical Service

Category: Service Training

Understanding Wire Rope Lay for Your Next Wire Rope Hoist Repair or Inspection

December 21, 2023 By Andy Rasch

Wire rope is a machine! It is the workhorse that lifts the heavy loads on wire rope hoists. As a crane technician, there is an endless amount of information you should know about wire rope. The more you understand, the better resource you can be to your customers. Luckily, you don’t need to be the expert! There are others to help you out including, crane and hoist manufacturers, wire rope manufacturers, and other crane technicians. In this article, we will talk about how Demag designs wire rope hoists, selects the wire rope for models that you can buy today, and those you will still find in the field for inspections and repair.

Read More

Navigate Model-Specific Codes | Modern Demag Light Lifting Products

November 21, 2023 By Jason Lander

Depending on the DC chain hoist or etrolley model you’re working on, error and warning codes have different meanings. Be prepared for your next service call.

Read More

Optimizing Demag E22C Travel Drives to Specific Requirements

October 10, 2023 By Jason Lander

Demag E22C electric travel drives are designed with the same plug and lift philosophy as DC chain hoists. Read more about optimizing the drive to specific requirements.

Read More

Diagnosing Additional Error Codes on Demag CANBUS Hoists and Cranes

March 28, 2023 By Andy Rasch

Diagnosing issues on CANBUS controlled Demag cranes & hoists can be a challenge. In this article, we extend our coverage of error codes to provide you more understanding of the possible fault codes encountered.

Read More

Maintenance and Service Tips for Demag KB and ZB Motors in Non-Crane Applications

February 7, 2023 By Andy Rasch

Servicing a Demag motor attached non-crane applications use the same adjustment procedures used on Demag crane equipment. Read more about servicing Demag motors on non-crane applications.

Read More

Troubleshooting 3-Phase AC Motors on Demag Hoists, Trolleys, and Bridge Drives

December 20, 2022 By Andy Rasch

Troubleshooting Demag hoists, trolleys, and bridge drives can require checking the 3-phase AC motor to determine if a new motor or a rewind is required.

Read More

The Difference Between the D2 and the D3 Versions when Starting Up a DRC10 Radio

October 25, 2022 By Andy Rasch

The DRC10D2 and DRC10D3 radio systems have differences that make the startup steps differ between the two systems. Read more about the differences so you’re ready for your next service call.

Read More

Troubleshooting Modern Demag Cranes with VFC Bridge Control & TDU Inverter

August 23, 2022 By Demag Cranes

Modern Demag cranes with VFC bridge control use a TDU inverter or DMI Drive. Learn more about IDing and efficiently troubleshooting for your next service call.

Read More

Demag Hoist Service Spotlight: Serviceability Improvements in Gen 2 DMR Wire Rope Hoist

June 14, 2022 By Andy Rasch

The Gen 2 Demag DMR wire rope hoist set a new precedent for ease of access, compared to the prior generation hoist. Read more about the improved serviceability.

Read More

Demag Service Guide | Using Manufacturer’s Documentation for Effective Maintenance & Repair

May 10, 2022 By Andy Rasch

A common question we get is where to find documentation to support the service of existing Demag equipment. Read our guide to find the information you need.

Read More

Posts navigation

Older posts
  • Categories
    • News
    • Service Training
    • Hoists
    • Cranes
    • Drives

Demag Cranes and Components Corp.
6675 Parkland Blvd., Suite 200
Solon, OH 44139

Designed by Sixth City Marketing