Author: Andy Rasch
Understanding Wire Rope Lay for Your Next Wire Rope Hoist Repair or Inspection
December 21, 2023Wire rope is a machine! It is the workhorse that lifts the heavy loads on wire rope hoists. As a crane technician, there is an endless amount of information you should know about wire rope. The more you understand, the better resource you can be to your customers. Luckily, you don’t need to be the expert! There are others to help you out including, crane and hoist manufacturers, wire rope manufacturers, and other crane technicians. In this article, we will talk about how Demag designs wire rope hoists, selects the wire rope for models that you can buy today, and those you will still find in the field for inspections and repair.
Read MoreDiagnosing Additional Error Codes on Demag CANBUS Hoists and Cranes
March 28, 2023Diagnosing issues on CANBUS controlled Demag cranes & hoists can be a challenge. In this article, we extend our coverage of error codes to provide you more understanding of the possible fault codes encountered.
Read MoreMaintenance and Service Tips for Demag KB and ZB Motors in Non-Crane Applications
February 7, 2023Servicing a Demag motor attached non-crane applications use the same adjustment procedures used on Demag crane equipment. Read more about servicing Demag motors on non-crane applications.
Read MoreTroubleshooting 3-Phase AC Motors on Demag Hoists, Trolleys, and Bridge Drives
December 20, 2022Troubleshooting Demag hoists, trolleys, and bridge drives can require checking the 3-phase AC motor to determine if a new motor or a rewind is required.
Read MoreThe Difference Between the D2 and the D3 Versions when Starting Up a DRC10 Radio
October 25, 2022The DRC10D2 and DRC10D3 radio systems have differences that make the startup steps differ between the two systems. Read more about the differences so you’re ready for your next service call.
Read MoreDemag Hoist Service Spotlight: Serviceability Improvements in Gen 2 DMR Wire Rope Hoist
June 14, 2022The Gen 2 Demag DMR wire rope hoist set a new precedent for ease of access, compared to the prior generation hoist. Read more about the improved serviceability.
Read MoreDemag Service Guide | Using Manufacturer’s Documentation for Effective Maintenance & Repair
May 10, 2022A common question we get is where to find documentation to support the service of existing Demag equipment. Read our guide to find the information you need.
Read More5 Critical Areas When Changing Out a DR Pro Control Board
March 22, 2022When you are working on a Demag DR Pro equipment with CANBUS control, it’s important you know the 5 critical areas of the control board. Read on to learn more.
Read MoreTroubleshooting and Diagnosis of Error 2 or Warning 1, 2, 3, 6, 7, 8 or 9 on a Demag DC Chain Hoist
February 22, 2022This post digs deeper into the self-diagnosis ability of the DC control board. Read more about this self-diagnosis ability for your next service call.
Read MoreBasic or Advanced IDAPSY? Optimize Your Service with Demag IDAPSY Diagnostic Software
December 14, 2021If you are a crane service technician, using IDAPSY diagnostic software gives you the opportunity to provide better service to your customers, potentially diagnosing issues quicker with the ability to see trends to help DR Pro and DMR wire rope hoists run more efficiently.
Read More